The below are special gifts for my love's birthday ^^
she also love TF, she is satisfying the 3 pcs on below,
TF- T-shirt
To make the heat transfer printing onto t-shirt, firstly you need to print out (I used inkjet) as mirror printing. (look at Transformers letter that is mirrored)
Usually it should be printed onto white t-shirt, in case of you need other color like green (my gf's favorite color) I offset the profile edge as green.
Once finish ironing, tear it out carefully.
(observe I avoid sharp edge all around photo) this is for long life purpose.
align the logo or else at back side
now you can see with the green edge we made, give the more nice to photo.
That's all for T-shirt making... easyyyyy right?
TF- Slippers
make the logo, and your desired letter, logo etc. with thickness around 2 mm.
by the soft type resin. (it must be soft type)
painted, I keep the original color green as resin color
( so the difficulty is your resin process must be good apperance)
once painting are done, cover them with lacquer for water resistance.
to attach it onto strap needs the spcial glue. I imported this kind of glue for this kind of material. it's strengh and flexible.
For other glue e.g. super glue, gum will not stand for long time.
use resin to write down on silicone plate. wait it dry.
attach them by latex glue.
it's finished the TF-Slippers.
TF-I phone optimus prime
make the Optimus prime head (solid piece). prepare flat head screw
size 1.2x8mm and 2.5x4mm
drill it as a bit smaller than screw size e.g. 1mm, and 2.2 mm.
screw them as optimum force.
drop silicone to protect the phone get scratches.
back side looks ok. if you see gaps, you can drop little glue into it.
done with no problem with usage (not to press you ear)
Another benifit (being monitor support).
Ok, this is some kind of relax hobby for my love and for your consideration.
Are you ready to getback to main hobby?
I'll go back to work and update soon.
thanks for watchiing
Bye for now...... ^0^
No comments:
Post a Comment